Furnaces
Show Trane Products
Hide Trane Products
XV95 Two-Stage Variable Speed Gas Furnaces
Premium heating meets super efficiency. The World's most efficient gas furnace
Every Trane furnace is packed with high-quality components. Each helps ensure that time after time, your unit will provide total comfort your family can rely on. The XV95 includes:
 |
- Variable-speed blower
- Two-stage gas heat provides greater fuel efficiency and better comfort control
- Heavy gauge, two-tone powder-painted cabinet
- Increased dehumidification with Comfort-R (™) mode
- Durable adaptive silicon Nitride hot surface igniter
- Multi-port, In-shot burners
- One-piece aluminized steel primary heat exchanger
- 24-volt Fuse protects Controls
- Insulated cabinet for quiet operation
- Convertible to horizontal left
- AL29-4C Stainless Steel secondary Heat Exchanger
- Cleanable filter with spring-loaded filter rack
- ERV, humidifier and air cleaner compatible
|
| Model |
Height (in.) |
Width (in.) |
Depth (in.) |
Nominal Capacity Output (BTUH) Stage1/Stage2 |
ICS* AFUE |
| TUH2B060A9V3VA |
40 |
17.5 |
28 |
37,700/58,000 |
96.7 |
| TUH2B080A9V3VA |
40 |
17.5 |
28 |
49,500/76,000 |
95.0 |
| TUH2C100A9V4VA |
40 |
21.0 |
28 |
61,800/95,000 |
95.0 |
| TUH2D120A9V5VA |
40 |
24.5 |
28 |
74,500/114,700 |
95.6 |
XL Two-Stage Gas Furnaces
Flexible comfort
Every Trane furnace is packed with high-quality components. Each helps ensure that time after time, your unit will provide total comfort your family can rely on. The XL90 includes:
 |
- Two-stage gas heat
- Four-Speed blower motor
- 40" high cabinet, 28" depth means it fits almost anywhere
- Convertible to horizontal
- Self-diagnostic microelectronic control
- Durable adaptive silicon Nitride hot surface igniter
- Sealed Combustion – 100% Outside air option
- Multi-port,in-shot burners
- One-piece heat exchanger
- Prepainted galvanized steel cabinet
- Washable filter
- Upflow models have hinged blower doors, easy-open door latches, and spring-loaded filter rack
- Enclosed burner box
- Insulated heavy steel cabinet
|
| Model |
Height (in.) |
Width (in.) |
Depth (in.) |
Nominal Capacity Output (BTUH) Stage1/Stage2 |
ICS* AFUE |
| TUX060R936W |
40 |
17.5 |
28 |
36,000/56,000 |
93.0 |
| TUX080R942W |
40 |
17.5 |
28 |
48,000/73,000 |
92.5 |
| TUX100R948W |
40 |
21.0 |
28 |
60,000/93,000 |
93.0 |
| TUX120R960W |
40 |
24.5 |
28 |
72,000/112,000 |
92.5 |
XR95 Single-Stage Gas Furnaces Premium Single Stage Heating
Every Trane furnace is packed with high-quality components. Each helps ensure that time after time, your unit will provide total comfort your family can rely on. The XR95 includes:
 |
- 40" high cabinet, 28" depth means it fits almost anywhere
- Aluminized steel heat exchanger
- Three row secondary heat exchanger
- Direct-drive, multi-speed blower motor
- Self-diagnostic microelectronic controller
- Durable adaptive silicon Nitride hot surface igniter
- Multi-port, In-shot burners
- Sealed combustion—100% outside combustion air option
- Pre-painted galvanized steel cabinet
- Hinged blower doors with easy-open door latches
- Enclosed burner box
- Insulated heavy steel cabinet
|
| Model |
Height (in.) |
Width (in.) |
Depth (in.) |
Nominal Capacity Output (BTUH) |
ICS* AFUE |
| TUH1B040A9241A |
40 |
17.5 |
28 |
38,000 |
95 |
| TUH1B060A9361A |
40 |
17.5 |
28 |
57,000 |
95 |
| TUH1B080A9421A |
40 |
17.5 |
28 |
76,000 |
95 |
| TUH1C080A9601A |
40 |
21 |
28 |
76,000 |
95 |
| TUH1C100A9481A |
40 |
21 |
28 |
92,150 |
95 |
| TUH1D100A9601A |
40 |
24.5 |
28 |
92,150 |
95 |
| TUH1D120A9601A |
40 |
24.5 |
28 |
104,500 |
95 |
Hide Trane Products
Show Carrier Products
Hide Carrier Products
Infinity™ 96 Gas-Fired Condensing Furnaces
Four-way multipoise design for high-efficiency upflow, down-flow or horizontal installations. All models are 39 7/8 inches tall and 28 1/2 inches deep.
Minimize combined gas and electric energy consumption: Two-stage operation, GE ECM variable-speed inducer and blower motors, plus advanced heat exchanger technology make this the world's most overall energy-efficient line of gas furnaces. ComfortHeatTM Technology gives consumers quiet, comfortable heat along with low energy bills, and IdealHumidityTM gives consumers year-round comfort. Infinity™ 96 products feature:
 |
- Aluminized steel primary heat exchangers and patented SerpentuffTM polypropylene-coated secondary heat exchangers, both with limited lifetime warranties
- Direct vent, sealed-combustion system using 100% outdoor combustion air for maximum reliability and quiet operation
- Proven hot-surface ignition
- Redundant slow-opening gas valve for safe, quiet ignition
- Convenient electronic air cleaner and humidifier terminals
- Capable of 1-pipe or 2-pipe venting
- Sidewall or vertical venting
- Propane convertible
- Optional concentric vent kit
- Multipoise
- 92.7% to 96.6% AFUE
- ComfortHeatTM Technology
- Intelligent microprocessor control
- State-of-the-art diagnosis features with Advanced Product Monitor software. Control connects directly to a laptop computer or Palm ComputingTM device to read out over 70 different parameters.
- Two-stage heating with single-stage thermostat
- Very low operating sound
- Integral part of the IdealHumidityTM System
- Maximum dehumidification selection for summertime cooling
- Full IdealHumidity benefits including "Super Dehumidify" and SmartEvapTM
- Variable-speed blower motor
- Increased SEER ratings for AC and HP systems
- Perfectly matches CFM to cooling system at all static points
- Power HeatTM Hot Surface Igniter
- Microprocessor based "smart" control center
- Automatically adjusts heating stage times to meet demand
- Adjustable heating air temperature rise
- ComfortFan® - constant fan speed selectable from thermostat
- Up to 12 cooling air flow selections with a wide range of capability LED diagnostics and self-test feature
- Stores fault codes during power outages
- Optional laptop and hand-held PDA diagnostic software
- Residential installations eligible for consumer financing through the Retail Credit Program
|
Performance 96 Gas-Fired Condensing Furnaces
The 58UVB Upflow Variable-Capacity Condensing Gas Furnace features ComfortHeat™ Technology and IdealHumidity™ that controls a 2-Stage Gas Valve, Variable-Speed Blower Motor, and Variable-Speed Inducer Motor, for maximum heating comfort, quiet operation, humidity control and ultra-high Annual Fuel Utilization Efficiency (AFUE) of 95%. The unit is CSA (AGA and CGA) certified for installation on combustible flooring and in alcoves, basements, closets, attics, crawl spaces, garages, or utility rooms. The 58UVB can be installed in upflow applications only, and can be used in conjunction with a split-system product for cooling. The 58UVB should only be installed as a 2-pipe venting system. A Carrier EDGE thermidistat Performance Heat Pump, can be used to form a complete Hybrid Heat Dual Fuel System. All units meet California Air Quality Management District emission requirements. All sizes are design certified in Canada.
 |
STANDARD FEATURES
- ComfortHeat™ Technology
- Integral part of the IdealHumidity™ System when used with EDGE thermidistat
- Power Heat™ Hot Surface Igniter
- SmartEvap™ can lower the humidity level in the home by nearly 10 percent
- ComfortFan™ allows control of continuous fan speed from the thermostat
- Serpentuff™ polypropylene-laminated condensing Heat Exchanger
- Designed for upflow only
- Variable-Speed Blower and Inducer Motors, 2-stage slow opening Gas Valve, and self-diagnostics
- Adjustable blower speed for cooling, continuous fan, and dehumidification
- Aluminized-steel primary Heat Exchanger
- Monoport inshot burners with hot surface ignition
- Propane convertible
- Factory-configured ready for upflow applications
- Fully-insulated casing including blower section
- Convenient Electronic Air Cleaner and Humidifier connections
- Installation flexibility: (sidewall or vertical vent)
- Ultra quiet (no special noise or vibration-isolation measures are required)
- Sealed combustion
- Most sizes use less electricity in low fire than a 100 watt light bulb.
- Residential installations eligible for consumer financing through the Retail Credit Program
|
58MCB Single Capacity Condensing Furnace
Multipoise 4-way design for high-efficiency upflow, downflow or horizontal installations in the home or business. All models are 39 7 /8 inches tall and 28 1 /2 inches deep. AGA/CGA certified.
 |
- Up to 92.1% AFUE in upflow position
- AGA/CGA certified for manufactured (mobile) home installations with conversion kit
- Direct vent, sealed combustion
- Capable of 1-pipe or 2-pipe venting
- Power HeatTM Hot Surface Igniter
|
Hide Carrier Products
Show Payne Products
Hide Payne Products
Payne X13
The Payne X13 is a unique 4-way multipoise condensing furnace with features like no other product in its class. The PG9MXA builds on the many Payne successes in the furnace industry and establishes a new standard for all high-efficiency gas furnaces.
Standard Features
 |
- Two heating stages
- 4-way multipoise design for upflow, downflow, or horizontal installation
- Highly efficient ECM blower motor
- Humidity control when using a humidity sensing thermostat
- Adjustable constant fan speed from the thermostat
- LED diagnostics and self test feature
- Stores fault codes during power outages
- Adjustable heating air temperature rise
- Dehumidification terminals on control board
- Adjustable cooling airflow
- Hot surface ignition
- Dual fuel compatible (including 13.0 SEER Heat Pumps)
- Two-speed inducer motor
- Residential installations eligible for consumer financing through the Payne Credit Program
|
Warranty
- 20-year warranty on heat exchangers
- 5-year parts warranty on all other components
- 10-year limited warranty on parts to timely registered original homeowner
Payne 92% Single Stage Furnace
The model PG9MA Condensing Gas Furnace is designed to achieve a rating of up to 92.1% Annual Fuel Utilization Efficiency (AFUE) depending on the type of installation and installation orientation. The PG9MA is designed for reliability, high efficiency, and quiet operation. Its unique arrangement of gas controls and venting flexibility makes this furnace practical for any type of installation. The PG9MA is approved for use with natural or propane gas and is GAMA certified. Field conversion to propane is required. The PG9MA is A.G.A./C.G.A. certified for direct vent installations in manufactured (mobile) homes with approved kit (except for 140 size unit). All units meet California Air Quality Management District emission requirements. All sizes are design certified in Canada
 |
Standard Features
- Factory-configured ready for upflow applications
- 4-way multipoise design for upflow, downflow, or horizontal installation
- Installation in direct vent (2-pipe) or non-direct vent (1-pipe) applications
- Installation flexibility:sidewall or vertical vent
- Hot surface ignition
- Propane convertible in all applications with approved kit
- Manufactured (mobile) home convertible with approved kit in direct vent applications except for 140 size
- Aluminized-steel primary heat exchanger
- Polypropylene-laminated condensing heat exchanger
- Electronic air cleaner and humidifier terminals
- Electronic control center with blower cooling relay standard
- Heavy galvanized prepainted steel cabinet
- Residential installations eligible for consumer financing through the Payne Credit Program
|
Warranty
- Limited lifetime warranty on heat exchangers when installed in direct-vent applications
- 20-year limited warranty when installed in non-direct vent applications
- 10-year limited warranty to timely registered original homeowner
Hide Payne Products
